Accessing WoSIS-derived datasets

Share on:

Standardised datasets derived from WoSIS are distributed using two formats. The most recent, latest (dynamic) version can be  accessed through an OGC-compliant WFS (Web Feature Service).  Further, snapshot (static) dataset(s) in TXT format are provided for consistent citation purposes.

  

Dataset versions

  • Latest (dynamic) dataset: This dataset contains the most recent complement of standardised soil data served from WoSIS. Being dynamic, the dataset will grow once new point data are standardised, additional soil properties are considered, and/or when possible ammendments are required.
    The latest dataset is served through an OGC-compliant WFS (Web Feature Service).
    WFS link for your GIS application: http://data.isric.org/geoserver/wosis_latest/wfs

  • Snapshot (static) dataset: These are a representation of the complement of standardised data available at a given moment (e.g. July 2016). Each snapshot is given a unique name and digital object identifier (doi) for consistent citation purposes.
    So far, one snapshot has been released. The file can be downloaded here; methodological details are provided in a paper in Earth System Data Journal.
    WFS link for your GIS application: http://data.isric.org/geoserver/wosis_snapshot/wfs

    [Note: Since early2018 the complement of soil properties considered in the '2016 snapshot' differs from that considered in wosis_latest, see Ribeiro et al. (2018)]
     

Procedures for accessing the point data from  QGIS respectively R using WFS are described in the Procedures Manual (App. A).

 

File naming conventions and descriptions as used in WoSIS:

Code

Property 

Units

 Description

BDFI33 Bulk density fine earth - 33 kPa kg/dm³ Bulk density of the fine earth fraction*, equilibrated at 33 kPa
BDFIAD Bulk density fine earth - air dried kg/dm³ Bulk density of the fine earth fraction*, air dried
BDFIFM Bulk density fine earth - field moist kg/dm³ Bulk density of the fine earth fraction*, field moist
BDFIOD Bulk density fine earth - oven dry kg/dm³ Bulk density of the fine earth fraction*, oven dry
BDFINS Bulk density density fine earth - moist. cond. not specified kg/dm³ Bulk density of the fine earth fraction*, moisture condition not specified
BDWS33 Bulk density whole soil - 33 kPa kg/dm³ Bulk density of the whole soil including coarse fragments, equilibrated at 33 kPa
BDWSAD Bulk density whole soil - air dried kg/dm³ Bulk density of the whole soil including coarse fragments, air dried
BDWSFM Bulk density whole soil - field moist kg/dm³ Bulk density of the whole soil including coarse fragments, field moist
BDWSOD Bulk density whole soil - oven dry kg/dm³ Bulk density of the whole soil including coarse fragments, oven dry
BDWSNS Bulk density whole soil - moist. cond. not specified kg/dm³ Bulk density of the whole soil including coarse fragments, moisture condition not specified
TCEQ

Calcium carbonate equivalent total 

g/kg

The content of carbonate in a liming material or calcareous soil calculated as if all of the carbonate is in the form of CaCO3 (in the fine earth fraction*); also known as inorganic carbon

ORGC

Organic carbon

g/kg

Gravimetric content of organic carbon in the fine earth fraction*

TOTC

Total carbon 

g/kg

Gravimetric content of organic carbon and inorganic carbon in the fine earth fraction*

CECPH7 Cation exchange capacity - buffered at pH7 cmol(c)/kg Capacity of the fine earth fraction* to hold exchangeable cations, estimated by buffering the soil at 'pH7'
CECPH8 Cation exchange capacity - buffered at pH8 cmol(c)/kg Capacity of the fine earth fraction* to hold exchangeable cations, estimated by buffering the soil at 'pH8'
CECNSP Cation exchange capacity - buffer not specified cmol(c)/kg Capacity of the fine earth fraction* to hold exchangeable cations, buffer pH not specified*
ECEC

Effective cation exchange capacity 

cmol(c)/kg

Capacity of the fine earth fraction* to hold exchangeable cations at the pH of the soil (ECEC). Conventionally approximated by summation of exchangeable bases (Ca2+, Mg2+, K+, and Na+) plus 1 N KCl exchangeable acidity (Al3+ and H+) in acidic soils 

ELCO1X Electrical conductivity - 1:x ratio dS/m Ability of a 1:x soil water extract to conduct electrical current (ECx, with x= 1 to 10) 
ELCOSP Electrical conductivity - saturated paste dS/m Ability of a water saturated soil paste to conduct electrical current (ECe)
ELCONS Electrical conductivity - ratio not specified dS/m Ability of a soil water extract to conduct electrical current , soil water ratio not specified
CFGR

Coarse fragments gravimetric total 

g/100g

Gravimetric content of coarse fragments* in the whole soil

CFVO

Coarse fragments volumetric total 

cm³/100cm³

Volumetric content of coarse fragments* in the whole soil

CLAY

Clay total 

g/100g

Gravimetric content of < X mm soil material in the fine earth fraction* (e.g. X = 0.002 mm as specified in the analytical method description)

SILT

Silt total 

g/100g

X to Y mm fraction of the fine earth fraction*;  Y as specified in the analytical method description (e.g. Y = 0.05 mm)

SAND

Sand total

g/100g

Larger than Y mm fraction of the fine earth fraction* ; Y as specified in the analytical method description (e.g. Y = 0.05 mm to 2 mm*)

PHCA

pH CaCl2 

 

A measure of the acidity or alkalinity in soils, defined as the negative logarithm (base 10) of the activity of hydronium ions (H+) in a CaCl2 solution, as specified in the analytical method descriptions

PHAQ

pH H2O 

 

A measure of the acidity or alkalinity in soils, defined as the negative logarithm (base 10) of the activity of hydronium ions (H+) in water

PHKC

pH KCl 

 

A measure of the acidity or alkalinity in soils, defined as the negative logarithm (base 10) of the activity of hydronium ions (H+) in a KCl solution, as specified in the analytical method descriptions

PHNF

pH NaF 

 

A measure of the acidity or alkalinity in soils, defined as the negative logarithm (base 10) of the activity of hydronium ions (H+) in a NaF solution, as specified in the analytical method descriptions

WG1500 Water retention gravimetric - 1500 kPa  g/100g Soil moisture content by weight, at tension 1500 kPa
WG0500 Water retention gravimetric - 500 kPa g/100g Soil moisture content by weight, at tension 500 kPa
WG0200 Water retention gravimetric - 200 kPa g/100g Soil moisture content by weight, at tension 200 kPa
WG0100 Water retention gravimetric - 100 kPa g/100g Soil moisture content by weight, at tension 100 kPa
WG0033 Water retention gravimetric - 33 kPa g/100g Soil moisture content by weight, at tension 33 kPa
WG0010 Water retention gravimetric - 10 kPa g/100g Soil moisture content by weight, at tension 10 kPa
WG0006 Water retention gravimetric - 6 kPa g/100g Soil moisture content by weight, at tension 6 kPa
WV1500 Water retention volumetric - 1500 kPa cm³/100cm³ Soil moisture content by volume, at tension 1500 kPa
WV0500 Water retention volumetric - 500 kPa cm³/100cm³ Soil moisture content by volume, at tension 500 kPa
WV0200 Water retention volumetric - 200 kPa cm³/100cm³ Soil moisture content by volume, at tension 200 kPa
WV0100 Water retention volumetric - 100 kPa cm³/100cm³ Soil moisture content by volume, at tension 100 kPa
WV0033 Water retention volumetric - 33 kPa cm³/100cm³ Soil moisture content by volume, at tension 33 kPa
WV010 Water retention volumetric - 10 kPa cm³/100cm³ Soil moisture content by volume, at tension 10 kPa
WV0006 Water retention volumetric - 6 kPa cm³/100cm³ Soil moisture content by volume, at tension 6 kPa
CFAO Soil classification FAO   Classification of the soil profile according to specified edition (year) of the FAO-Unesco Legend (up to soil unit level)
CWRB Soil classification WRB   Classification of the soil profile according to specified edition (year) of the World Reference Base for Soil Resources (WRB, up to qualifier level)
CSTX Soil classification Soil Taxonomy   Classification of the soil profile according to specified edition (year) of the USDA Soil Taxonomy (up to subgroup level)
DSDS Depth of soil - sampled cm Total depth of soil sampled
HORDES Horizon designation   Horizon designation as provided in the source database** 

*   The fine earth fraction is generally defined as being < 2 mm. However, an upper limit of 1 mm was used in the former Soviet Union  and its sattelite states (Katchynsky scheme). This has been indicated in the database.

** Where available, the 'cleaned' (original) layer/horizon designation is provided for general information; these codes have not been standardised.

 

Technical documentation

Ribeiro E, Batjes NH and Van Oostrum AJM 2018. World Soil Information Service (WoSIS) - Towards the standardization and harmonization of world soil data. Procedures Manual 2018. ISRIC report 2018/01, ISRIC - World Soil Information, Wageningen, 166 p. (PDF)

Batjes NH, Ribeiro E, van Oostrum A, Leenaars J, Hengl T, and Mendes de Jesus J 2017: WoSIS - Providing standardised soil profile data for the world, Earth System Science Data 9, 1-14  (PDF).

 

Mailing list

In case of having any question on accessing or using ISRIC data, please post your question in our public mailing list by sending an email to isric-world-soil-information@googlegroups.com. Join group

 

Contact: